• High Density Analog Output Module for the Modular Controller Series
• Available Outputs include 0 to 5 VDC, 0 to 10 VDC, ±10 VDC, and 0/4-20 mA DC
• Outputs are Isolated from each other and from the Backplane
• Outputs are Software Configured and Fully Scalable
• Auto Addressing Minimizes Configuration Time
• Can Be Used in Conjunction with any CS Series Modules

• Provides Enhanced Features for Data Acquisition or Multi-zone PID Control Applications
• Webserver Provides Worldwide Access to Data Logs and Virtual HMI (SX & GT)
• Virtual HMI Offers Built-in PC-based SCADA Functionality (SX & GT)
• Performs Hierarchical Control of Other Modules in the Modular Controller Series
• Stores Module Configuration Information and Automatically Reprograms Replaced Modules
• Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
• Independent Serial Ports Provide Virtually Unlimited Integration Methods
• 10 Base-T/100 Base-TX Ethernet Connection Provides Networking Capability
• Supports up to 16 Modular Controller Series Modules
• CompactFlash® Slot Allows Process Data to be Logged Directly to CSV Files (SX & GT)

• Performs Hierarchical Control of other Modules in the Modular Controller Series
• Provides Power and Communications to Modules through Backplane Connector
• Stores Module Configuration Information, and Automatically Reprograms Replaced Modules
• Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
• Independent Serial Ports Provide Virtually Unlimited Integration Methods
• 10 BASE-T/100 BASE-TX Ethernet Connection Provides Networking Capability
• Supports up to 16 Modular Controller Series Modules
• Supported By Crimson 2.0 Software (Older Crimson 1.0 Files May Be Imported Into Crimson 2.0)

Click here for upgrade instructions from
Version 1 (CSMSTRSE) to Version 2 (CSMSTRV2)

• Adds remote I/O capability to the Modular Controller series
• Eight input, six output digital module
• Inputs isolated from outputs
• Inputs independently switch selectable for sink or source signals
• Inputs independently configurable for high or low active state
• Inputs independently switch selectable for high or low frequency signals
• Relay or NFET output models available

• Dedicated high density input modules for the Modular Controller series
• Models available to accept ±10V and 0/4-20 mA inputs with per channel input options
• ±10V and 0/4-20 mA input versions available with 100 point linearization
• Unused inputs can be disabled to increase overall reading rate
• Ideal for data-acquisition applications
• Auto addressing minimizes configuration time
• Can be used in conjunction with any CS series modules

• Dedicated single and dual PID modules for the Modular Controller series
• Hot-swappable replacement reduces downtime
• Auto addressing minimizes configuration time
• Fully isolated design provides reliable operation
• Pid control with reduced overshoot
• Universal inputs accept tc, rtd, 0-10 v and 0/4-20 mA signals
• On demand auto-tuning of PID settings
• DC analog output (optional, CSPID1 only)
• Heater current input (optional) ensures detection of heater circuit failure
• Windows® configuration software

• Strain Gage Module for the Modular Controller Series
• Hot-swappable Replacement Reduces Downtime
• Auto Addressing Minimizes Configuration Time
• PID Control with Reduced Overshoot
• Load Cell, Pressure and Torque Bridge Inputs
• Software Selectable Low Level Inputs
(20 mV, 33 mV or 200 mV Full Scale)
• Software Selectable 5 VDC or 10 VDC Bridge Excitation
• Digital Tare (re-zero), Batch Totalizer, and Peak/Valley (max/min) Recording
• On Demand Auto-tuning of PID Settings
• DC Analog Output
• Windows ® Configuration Software

• Dedicated high density temperature input modules for the Modular Controller series
• Models available for thermocouple or RTD inputs
• Thermocouple input version provides independent type selection for each input
• Unused inputs can be disabled to increase overall reading rate
• Ideal for data-acquisition applications
• Auto addressing minimizes configuration time
• Can be used in conjunction with any CS series modules

• Dual Loop Controller with RS-485 Modbus™
• Modular Building Block for Multi-Zone Process Control
• Two Independent PID Control Loops
• PID Control with Reduced Overshoot
• Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20mA
• On Demand Auto-Tuning of PID Settings
• Two DC Analog Outputs (Optional)
• Windows™ Configuration Software

• Dual Loop Controller with DH-485
• Modular Building Block for Multi-Zone Process Control
• Two Independent PID Control Loops
• PID Control with Reduced Overshoot
• Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20 mA
• On Demand Auto-Tuning of PID Settings
• Two DC Analog Outputs (Optional)
• Windows™ Configuration Software

• Dual Loop Controller with DeviceNet™
• Modular Building Block for Multi-Zone Process Control
• Two Independent PID Control Loops
• PID Control with Reduced Overshoot
• Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20mA
• On Demand Auto-Tuning of PID Settings
• Two DC Analog Outputs (Optional)
• Windows™ Configuration Software