| Build 2.0.0.427(04/17/08) |
| Enhancements: |
| | Includes G3 firmware build 617.
|
| Drivers: |
| | ABB COMLI Master Driver
Matsushita FP MEWTOCOL-COM (Ascii) v2.00 driver
Alpha Gear Ternary
Maguire MLAN Driver
Panasonic/Matsushita FP TCP/IP Master driver w/ ET-LAN Data Format 1 support
Applied Motion SCL Driver
|
| Updates: |
| | AB L5K updates
Banner on G315
EthernetIP multiple masters support
Alstom J/K Master - Adding device level ping and timeout access. Monitor support.
Raw TCP/IP - TCP Keep-Alive support
DeviceNet
|
| Features: |
| | Start/swept angles added to whole dial gauge - allows 360 degree dial gauge
Added On-Message support on SMS text messages |
| Hardware: |
| | G306A Display
|
|
| Build 2.0.0.410(01/24/08) |
| Enhancements: |
| | Includes G3 firmware build 600.
|
| Drivers: |
| | SEW Movilink B Serial Master driver
LG/LS Master-K via CNET Serial Master Driver
EMCO FP-93 Driver
Yaskawa FSP Driver
|
| Updates: |
| | Modbus Universal Serial Master driver
CANOpen SDO Master driver
CANOpen Slave EDS file support
Omron Serial via FINS Master driver
Cruisair Temperature Controller Driver
AB EIP Drivers
Hitachi H Series
Node guarding support in CANOpen SDO Slave driver
Buffer writes for multidrop applications (Alstom J/K Master)
Allen Bradley L5K file import support
Red Lion Instrument driver
|
| Features: |
| | Forced Write Functions
Communications Delay
Dynamic DNS Support
SetStringTag Function
Enable control added to Tag alarms and events
Added 50 ohm copper RTD Type-428 support for CSRTD6 module
|
| Hardware: |
| | Cub5 V,I,P Ver 1.1
Cub5 Type-428 RTD
Cub5 Version 3.0 (Dual Setpoint)
|
|
| Build 2.0.0.378(09/19/07) |
| Enhancements: |
| | Includes G3 firmware build 568.
|
| Drivers: |
| | Parker Acroloop TCP/IP Master driver
|
| Updates: |
| | Toshiba Series PLC driver
Indramat CLC Master driver
Parker Acroloop Motion Controller driver
S7 300/400 TCP/IP Master driver
Mitsubishi A/Q/FX TCP/IP Master driver
Modbus slave drivers
Siemens TI-500 Series driver
CSPID2 module
|
| Features: |
| | Verify Database support
Data Viewer support
|
|
| Build 2.0.0.365 (08/02/07) |
| Enhancements: |
| | Includes G3 firmware build 555.
|
| Drivers: |
| | Elmo Drives
|
| Updates: |
| | Matsushita FP Series Driver
Yaskawa MP Series Driver
Siemens S5 Drivers
Siemens S7 via PPI v 2.0 Driver
|
| Hardware: |
| | PAX Clock / Timer
G315
|
|
| Build 2.0.0.347 (06/07/07) |
| Enhancements: |
| | Includes G3 firmware build 537.
|
| Updates: |
| | Modbus Universal Master
Intelligent Actuator XSEL
Kollmorgen 600 Series Drives
Allen Bradley Native Tags Addressing
Allen Bradley DF1 Master Drivers
GE SNP-X Driver
Siemens S5 via AS511 Drivers
Banner PresencePLUS Data
Yaskawa TCP/IP Master
HBM AED/PW/FIT
|
| Hardware: |
| | LDxA
|
|
| Build 2.0.0.332 (04/05/07) |
| Enhancements: |
| | Includes G3 firmware build 522.
|
| Updates: |
| | Manual
Intelligent Actuator XSEL driver
|
| Hardware: |
| | CMSTRLE, DSPLE
|
|
| Build 2.0.0.324 (03/19/07) |
| Enhancements: |
| | Includes G3 firmware build 514.
|
| Drivers: |
| | GE SNP-X Master driver
Kollmorgen 600 Series Drives
MTS DDA
Cruisair Temperature Controller
BACNet 802.3 Master and Slave Drivers
BACNet UDP/IP Master and Slave Drivers
BACNet MS/TP Master and Slave Drivers
Yaskawa Series 7 Inverters Driver
|
| Updates: |
| | PLC Direct Koyo DirectNet and K Sequence Drivers
Modbus Serial Slave Driver
CANOpen SDO Slave
Siemens S7 300 TCP/IP Master Driver - CPU 300 and CP343 support
Siemens CP243 via ISO TCP/IP Master Driver
Siemens S7 via MPI Adapter Driver
Mitsubishi FX Series Driver
|
| Features: |
| | Compact Flash image primitive
HasAccess user function
Alarm viewer help
|
| Hardware: |
| | G306A, CSOUT4
|
|
| Build 2.0.0.299 (12/21/06) |
| Enhancements: |
| | Includes G3 firmware build 489.
|
| Drivers: |
| | Banner PresencePLUS Data Driver
Yaskawa TCP/IP Series 7 Driver
YET Xtra Driver
Honeywell UDC9000 Driver
|
| Updates: |
| | S7 CP243 via ISO TCP/IP Master Driver
QuickSilver Master Driver
Dupline Mastergenerator via Modbus Driver
Toshiba Series PLC Driver
GE TCP/IP Master via SRTP Driver
Modbus Slave Driver
Siemens S7 via MPI Adapter Driver
|
| Features: |
| | Security System integration
Snapshot logging support
Gateway Block Export
|
| Hardware: |
| | CUB5I, CUB5P, CUB5RT, CUB5TC, CUB5V
|
|
| Build 2.0.0.287 (10/27/06) |
| Enhancements: |
| | Includes G3 firmware build 476.
|
| Drivers: |
| | Galil Serial Driver
Galil TCP/IP Driver
Beckhoff ADS/AMS TCP/IP Driver
|
| Updates: |
| | Web Server functionality
|
| Features: |
| | SetIntTag and SetRealTag user functions.
|
| Hardware: |
| | ICM8
|
|
| Build 2.0.0.285 (10/23/06) |
| Enhancements: |
| | Includes G3 firmware build 474.
|
| Drivers: |
| | Allen Bradley Native Tag Addressing drivers
Siemens S5 via AS511 drivers
Eurotherm 590 (Old Style) driver
|
| Updates: |
| | Siemens TI-500 Series driver
Parker Acroloop Motion Controller driver
Keyence KV Series driver
HBM AED/PW/FIT driver
Danfoss VLT Series driver
Adam 4000 Series Modules driver
FileViewer Primitive
|
|
| Build 2.0.0.273 (08/18/06) |
| Enhancements: |
| | Includes G3 firmware build 462.
|
| Drivers: |
| | FlowCom Master driver.
Yaskawa TCP/IP Memobus Master driver.
|
| Updates: |
| | Siemens S7 via MPI driver
Siemens S7-300 PN Series PLC TCP/IP Master driver
CANOpen SDO Master
KEB DIN66019II Slave driver
Siemens S7 CP243 via ISO TCP/IP Master driver
Modbus Encapsulated TCP/IP Master driver
Modbus TCP/IP Master driver
RLC Instrument driver
|
| Features: |
| | GetAlarmTag user function.
File Viewer primitive.
System calibration pages.
|
| Hardware: |
| | Profibus option card
|
|
| Build 2.0.0.263 (06/23/06) |
| Enhancements: |
| | Includes G3 firmware build 452.
|
| Drivers: |
| | Siemens S7 200 CP243 via ISO TCP/IP driver
|
| Updates: |
| | CSDIO14 module
|
| Hardware: |
| | CSMSTRGT
CSGATEGT
|
|
| Build 2.0.0.261 (06/20/06) |
| Enhancements: |
| | Includes G3 firmware build 450.
|
|
| Build 2.0.0.259 (06/14/06) |
| Enhancements: |
| | Includes G3 firmware build 448.
|
| Drivers: |
| | KEB DIN66019II Master driver.
KEB DIN66019II Slaver driver.
CAN SDO Slave driver.
Banner PresencePLUS Camera TCP/IP driver.
|
| Updates: |
| | Dupline Mastergenerator via Modbus driver.
Modbus TCP/IP Master driver.
Modbus TCP/IP Slave driver.
AB DF1 Master driver.
AB DH485 driver.
AB DF1 TCP/IP Master driver.
AB PCCC via EIP Master driver.
Danfoss VLT Series driver.
Profibus.
GE TCP/IP Master via SRTP driver.
GE SNP Master driver.
HBM AED/PW/FIT driver.
Siemens PPI (version 2.00) driver.
Yaskawa NS600 driver.
|
| Hardware: |
| | MC V2
|
|
| Build 2.0.0.243 (04/07/06) |
| Enhancements: |
| | Includes G3 firmware build 432.
|
| Drivers: |
| | Profibus |
| Updates: |
| | Dupline Mastergenerator via Modbus driver
Mitsubishi A/Q TCP/IP driver
Omron Master via FINS driver
Modbus TCP/IP Master driver
Modular Controller Manual
Crimson 2.0 Manual
|
| Features: |
| | G3 Panel Emulation
Primitive real tag support
|
| Hardware: |
| | CSSG
|
|
| Build 2.0.0.238 (03/09/06) |
| Enhancements: |
| | Includes G3 firmware build 428.
|
| Updates: |
| | File operations
|
|
| Build 2.0.0.237 (03/08/06) |
| Enhancements: |
| | Includes G3 firmware build 427.
|
| Updates: |
| | Rich Tag Button primitive
|
|
| Build 2.0.0.235 (03/01/06) |
| Enhancements: |
| | Includes G3 firmware build 425.
|
| Drivers: |
| |
|
| Updates: |
| | Scatter Graph primitive
Allen Bradley DF1 TCP driver
Modbus Master driver
Omron C Series PLC driver
Schneider-Telemechanique Uni-Telway Slave
|
| Features: |
| |
|
|
| Build 2.0.0.230 (02/06/06) |
| Enhancements: |
| | Includes G3 firmware build 420.
|
| Drivers: |
| | Indramat CLC Master driver.
Mitsubishi MELSERVO driver.
Giddings & Lewis C/E Controller driver.
CTC 2000 Series serial master driver.
AC Tech Simple Servo driver.
|
| Updates: |
| | Siemens S7 via PPI
CAN SDO master driver.
Allen Bradley DF1 & DH485 drivers.
Modbus Universal Master driver.
Modbus RTU Monitor driver.
Honeywell 620 driver.
QuickSilver driver.
Schneider / Telemechanique Uni-Telway.
Siemens S7 via MPI.
Raw TCP/IP Active driver.
|
| Features: |
| | Added security support.
Added RenameFile(), SendFile(), GetPortConfig() and LogSave().
Added disk space functions.
Tag sort support added.
Added Sync Manager.
AlarmAccept and AlarmAcceptAll user functions.
|
|
| Build 2.0.0.218 (11/21/05) |
| Enhancements: |
| | Includes G3 firmware build 408
|
| Drivers: |
| |
|
| Updates: |
| | Modbus drivers
Allen Bradley DF1 & DH485 drivers
Siemens S7 via MPI
|
| Features: |
| | Added security support.
|
|
| Build 2.0.0.216 (11/09/05) |
| Enhancements: |
| | Includes G3 firmware build 406 |
| Drivers: |
| | Siemens S7 300 Series PLC TCP/IP driver.
|
| Updates: |
| | CAN SDO Master driver.
Siemens S7 MPI Master serial driver.
AB DF1 and DH485 drivers.
|
| Features: |
| | Remote view refresh throttling added.
Real type support added to gateway blocks.
Hebrew added.
|
|
| Build 2.0.0.214 (10/07/05) |
| Enhancements: |
| | Includes G3 firmware build 401 |
| Drivers: |
| | Yokogawa FA-M3 TCP/IP master driver
Yokogawa FA-M3 serial master driver
Hitachi H Series driver
|
| Updates: |
| | Schneider - Telemechaniuqe Uni-Telway driver.
Modbus serial master driver.
Red Lion RLC Instrument driver.
LMB driver.
AB DF1 and DH485 master drivers.
AB DF1 TCP/IP master includes ST string support.
AB PCCC/EIP master driver includes ENI module support.
GE TCP/IP master via SRTP.
GE SNP master driver.
Koyo PLC UDP master driver.
Mitsubishi FX driver includes extended register access.
|
| Features: |
| | Added batch logging and CF event logging.
Configurable TCP download port support added.
Alarm and Alarm Ticker Color Selection via Priority.
Added remove button to Event & Alarm Viewers.
|
| Hardware: |
| | Enhanced Master, Data Station Plus, T16, P16, T48, P48 |
|
| Build 2.0.0.197 (07/25/05) |
| Enhancements: |
| | Includes G3 firmware build 387 |
| Drivers: |
| | Allen-Bradley Ultra 3000 driver.
|
| Updates: |
| | Matsushita FP Series driver.
Yaskawa Legend/SMC 3010 driver.
Schneider Telemechanique Uni-Telway Slave driver.
King KingBus ASCII driver.
PLC Direct Koyo UDP Master driver.
Allen-Bradley DF1 and DH485 drivers.
|
| Features: |
| | Rich Button multi-line label support.
Trend viewer primitive enhanced with cursor support.
Added ReadFile() and WriteFile() user functions.
|
|
| Build 2.0.0.187 (06/02/05) |
| Enhancements: |
| | Includes G3 firmware build 377. |
| Drivers: |
| | EZ Automation EZ serial master driver.
EZ Automation EZ ethernet master driver.
HBM AED/PW/FIT driver.
King KingBus ASCII serial master driver.
|
| Updates: |
| | Matsushita FP Series driver.
GE SRTP TCP/IP Master via SRTP driver.
Siemens S7 via PPI driver.
Adam 4000 Series Modules driver.
|
| Features: |
| | Added WriteAll user function.
|
| Hardware: |
| | G308A |
|
| Build 2.0.0.184 (05/13/05) |
| Enhancements: |
| | Includes G3 firmware build 374. |
| Drivers: |
| | Parker Acroloop driver.
Rexroth Indramat Ecodrive ASCII driver.
Rexroth Indramat SIS driver.
Yaskawa Universal SMC driver.
|
| Updates: |
| | Modbus Universal Serial driver.
Red Lion Instrument driver.
|
| Features: |
| | Data tags viewer added.
Color selection for data logger and trend viewer.
Added WaitData function.
|
| Hardware: |
| | PAX
CUB5
|
|
| Build 2.0.0.170 (03/24/05) |
| Enhancements: |
| | Includes G3 firmware build 360. |
| Updates: |
| | Mitsubishi A/Q/FX MELSEC serial driver - Added MELSEC 5 support.
|
|
| Build 2.0.0.166 (03/17/05) |
| Enhancements: |
| | Includes G3 firmware build 356. |
| Updates: |
| | Mitsubishi Q Series Ethernet driver enhancements.
|
|
| Build 2.0.0.165 (03/15/05) |
| Enhancements: |
| | Includes G3 firmware build 355. |
| Drivers: |
| | PLC Direct Koyo Ethernet driver |
| Updates: |
| | R Register support for Mitsubishi Q Series Ethernet driver.
Real support for Mitsubishi MELSEC drivers.
Extended register ranges for PLC Direct Koyo serial drivers.
Added element increment and entry mode device options for CAN SDO Master driver.
32-bit access for PLC Direct Koyo K Sequence and Direct Net data registers.
Keypads made larger for 320x240 display.
|
| Features: |
| | DeleteDirectory function.
System tags ActiveAlarms and IsSirenOn.
Support for label in key pad added.
Tag usage |
|
| Build 2.0.0.154 (01/20/05) |
| Enhancements: |
| | Includes G3 firmware build 346. |
| Drivers: |
| | Keyence KV Series PLC driver
|
| Updates: |
| | Telemechanique Uni-Telway driver
Mitsubishi FX driver
Danfoss VLT 600 driver
Modbus TCP Slave driver
IFM ASI Master driver
Eurotherm 635 driver
IAI XSEL driver
Mitsubishi A/Q PLC drivers (32-bit Data register support)
|
| Features: |
| | Modify IP, Net Mask and Gateway address support added.
DrvCtrl, GetNetMask and GetNetGate user functions added.
|
|
| Build 2.0.0.133 (11/11/04) |
| Enhancements: |
| | Includes G3 firmware build 328. |
| Drivers: |
| | Siemens TI-500 Master Serial driver
Yaskawa Universal SMC driver |
|
| Build 2.0.0.129 (10/20/04) |
| Enhancements: |
| | Includes G3 firmware build 324. |
| Features: |
| | Data Tags Viewer added
|
|
| Build 2.0.0.126 (10/12/04) |
| Enhancements: |
| | Includes G3 firmware build 321. |
| Drivers: |
| | IFM ASI CoDeSys SP driver.
Mitsubishi Q Series PLC TCP driver
MTS Modbus
Modbus RTU Monitor
|
| Updates: |
| | IRCON User Adjustable Comms Timeout
Adding RW Register, Timer and Counter support for Toshiba PLC Serial
driver
|
|
| Build 2.0.0.119 (09/23/04) |
| Enhancements: |
| | Includes G3 firmware build 315. |
| Drivers: |
| | Intelligent Actuator, Robocylinder/E-Con
Intelligent Actuator, XSEL
Modbus Encapsulated Modbus Driver |
| Updates: |
| | SSD Drives / Eurotherm
Adjustable ping register, offset calculation and configurable transaction timeout device level settings to the CAN Master driver.
Extended Data Registers and allowed user configuration of PC Number for the Mitsubishi A/Q TCP driver.
Extended Modbus serial drop number to 255 and added frame validation disable for communications with devices that do not calculate a valid CRC or LRC.
Modification to allow CAN to communicate at baud rates beyond 250K.
|
|
| Build 2.0.0.109 (09/08/04) |
| Enhancements: |
| | Includes G3 firmware build 305. |
| Drivers: |
| | Contrex Drives
Control Techniques Mentor II |
| Updates: |
| | Eurotherm selection changed to SSD Drives / Eurotherm.
Added addition Eurotherm selections.
Mitsubishi FX supports multidrop.
Modbus driver enhancements.
Added DF1 read suppport for PLC-5.
Added mode 2 of OpenFile user function.
|
| Features: |
| | Added CreateDirectory user function.
Added DeleteFile user function.
Keypad color support.
Added OnChange action to integer, real, string, bit, and multi tags.
Added numeric only and raise/lower keypad options.
Added ability to translate contents of Event Viewer and Alarm Viewer text. |
| Hardware: |
| | PAXDP |
|
| Build 2.0.0.100 (08/12/04) |
| Enhancements: |
| | Includes G3 firmware build 297. |
| Drivers: |
| | Toshiba PLC serial driver.
Yaskawa SGDH Servo Amplifier driver.
Yaskawa NS600 Indexer driver. |
| Updates: |
| | Ircon Modline driver updated.
|
| Features: |
| | Added color selection to alarm ticker and viewer.
Added numeric only and raise/lower keypad options.
Set function. |
| Hardware: |
| | G306 |
|
| Build 2.0.0.092 (07/28/04) |
| Enhancements: |
| | Includes G3 firmware build 289. |
| Drivers: |
| | Adam 4000 Series serial driver.
Eurotherm 635/637 serial driver.
Eurotherm 690 serial driver.
External modem support.
SMS Support. |
| Updates: |
| | Updated C2 manual.
Added confirmation when clearing raw or modem ports.
Added buffer size property to data logs.
|
| Features: |
| | Dial Gauge primitive.
CreateFile and FileWriteLine functions.
GetInterfaceStatus function.
Support for Unicode import and export.
Trend viewer primitive. |
|
| Build 2.0.0.077 (06/22/04) |
| Enhancements: |
| | Includes G3 firmware build 274. |
| Drivers: |
| | Yaskawa MP Series Controller Master driver.
Omron FINS Master Serial driver.
Omron FINS Ethernet driver. |
|
| Build 2.0.0.074 (06/07/04) |
| Enhancements: |
| | Includes G3 firmware build 271. |
| Updates: |
| | Default communications settings change for Omron C Series driver. |
| Features: |
| | Select set of grouped primitives on UnGroup action.
GetNetIp() and GetNetId() functions added.
Changed to info text naming. Added view mapping button to toolbar. |
|
| Build 2.0.0.071 (05/27/04) |
| Enhancements: |
| | Includes G3 firmware build 268. |
| Drivers: |
| | Added virtual and linked serial port drivers. |
| Updates: |
| | Added file I/O access support for AB drivers.
|
| Features: |
| | Added view mapping button to toolbar.
Multiple language support for G308/10.
Multi-line, multi-state primitive support added.
Added ability to print events to raw port.
Added Swap Word transform for real tags.
Multi-state format and color extended to support 512 states.
Port sharing.
Event logging to CompactFlash.
Event printing.
|
|
| Build 2.0.0.062 (05/03/04) |
| Enhancements: |
| | Includes G3 firmware build 259. |
| Drivers: |
| | IMO K Series Loader Port
Red Lion Big Flexible Display
|
|
| Build 2.0.0.061 (04/30/04) |
| Enhancements: |
| | Includes G3 firmware build 258. |
| Drivers: |
| | Alstom SNP and SRTP drivers. |
|
| Build 2.0.0.059 (04/27/04) |
| Enhancements: |
| | Includes G3 firmware build 256. |
| Drivers: |
| | Alstom GEM80 ESP J/K Master
Alstom GEM80 ESP J/K Slave
Alstom GEM80 ESP Program Port Master
Alstom GEM80 ESP TCP/IP Master
Animatics Smart Motor
CANOpen SDO Master
Festo FPC, IPC, FEC Series Controller
Garmin NMEA-0183 |
| Updates: |
| | Added 32-bit support to GE SRTP TCP Master. |
| Hardware: |
| | CAN option card. |
|
| Build 2.0.0.056 (04/09/04) |
| Enhancements: |
| | Includes G3 firmware build 254. |
| Drivers: |
| | Parker 6K Master Serial Driver
Parker 6K TCP/IP Master over Ethernet
Telemechanique Uni-Telway Serial Driver
Yaskawa Legend / SMC 3010 Serial Driver
Yaskawa TCP/IP Master over Ethernet
|
| Features: |
| | Support added for Static Text Primitive editing through overlayed
Edit Control.
Added support for Unicode languages.
Added justification option to string format.
Added DecToText, ControlDevice, IsDeviceOnline.
Added Duplicate facility to tag list.
Added ability to import and export tag mappings.
Added CommsError variable.
Added EnableDevice and DisableDevice functions.
|
|
| Build 2.0.0.053 (03/25/04) |
| Enhancements: |
| | Includes G3 firmware build 251. |
|
| Build 2.0.0.052 (03/24/04) |
| Enhancements: |
| | Includes G3 firmware build 250. |
| Updates: |
| | Updated Modbus serial drivers. |
|
| Build 2.0.0.051 (03/23/04) |
| Enhancements: |
| | Includes G3 firmware build 249. |
| Drivers: |
| | No new drivers added. |
| Updates: |
| | Added MulDiv and Scale functions. |
| Features: |
| | Added custom images on pushbuttons. |
|
| Build 2.0.0.050 (03/22/04) |
| Enhancements: |
| | Includes G3 firmware build 248. |
| Features: |
| | Added Symbol Factory. |
|
| Build 2.0.0.048 (03/12/04) |
| Enhancements: |
| | Includes G3 firmware build 246. |
| Drivers: |
| | IDEC Micro 3 Series / ONC v1.01 Serial Driver
Mitsubishi A/Q Series TCP/IP Master v1.01
Pacific Scientific 830 v1.01 Master Serial Driver
Telemechanique Uni-Telway v1.01 Serial Driver
|
| Updates: |
| | Added ability to format time as elapsed hours.
|
| Features: |
| | Ability to block remote touch and key events.
Download a configuration over Ethernet. |
|
| Build 2.0.0.047 (03/10/04) |
| Enhancements: |
| | Includes G3 firmware build 245. |
| Drivers: |
| | IDEC PLC
Mitsubishi A/Q Series over TCP/IP
Pacific Scientific 830 Master Serial Driver
|
|
| Build 2.0.0.043 (02/18/04) |
| Enhancements: |
| | Includes G3 firmware build 241. |
|
| Build 2.0.0.042 (02/17/04) |
| Enhancements: |
| | Includes G3 firmware build 240. |
| Drivers: |
| | Mitsubishi FX Serial Driver
Siemens S7 via MPI Adaptor
|
|
| Build 2.0.0.041 (02/12/04) |
| Enhancements: |
| | Includes G3 firmware build 239. |
| Drivers: |
| | Quicksilver Silvermax v1.01
|
| Updates: |
| | Updated language resources. |
|
| Build 2.0.0.039 (02/10/04) |
| Enhancements: |
| | Includes G3 firmware build 237. |
| Drivers: |
| | Dupline Mastergenerator via Modbus v1.01
IMO PLC-CNET v1.00
Lenze LECOM-A/B Master Serial Driver v1.01
Added 32-bit support for Modbus TCP/IP Master v1.02
|
| Updates: |
| | Mapping of strings and arrays to PLC registers.
Support for packing of mapped strings.
Updated language resources.
Added 2-wire/4-wire selection for drivers on RS485 ports.
|
| Features: |
| | Email notification of alarms via SMTP.
String version of ReadData for mapped arrays.
Additional time manipulation functions.
Touch screen test primitive. |
|
| Build 2.0.0.034 (01/23/04) |
| Enhancements: |
| | Includes G3 firmware build 232. |
| Drivers: |
| | Krohne Flowmeter IFC020D
Mitsubishi A/Q Series
SEW MOVILINK Master |
| Features: |
| | Added ability to move web server from port 80. |
| Hardware: |
| | Support added for expansion port (RS232/485). |
|
| Build 2.0.0.033 (01/06/04) |
| Enhancements: |
| | Includes G3 firmware build 231 |
| Drivers: |
| | Ircon Modline
Krohne Flowmeter IFC020D
|
|
| Build 2.0.0.031 (12/30/03) |
| Enhancements: |
| | Includes G3 firmware build 229. |
| Features: |
| | Add Strip function for string manipulation.
Added touch support to geometric and tank primitives.
|
|
| Build 2.0.0.030 (12/19/03) |
| Enhancements: |
| | Includes G3 firmware build 228.
|
| Drivers: |
| | Allen Bradley DF1 TCP master driver v1.01
Allen Bradley DF1 has preset and value support for timers/counter.
PLC Direct naming generalized as driver work with many devices.
|
| Features: |
| | Selector switche primitives added.
PortClose function added for raw ports.
JPEG import support added.
Custom fonts selection added.
|
|
| Build 2.0.0.027 (12/09/03) |
| Enhancements: |
| | Includes G3 firmware build 225. |
| Features: |
| | Added model selection.
Added support for compress mode within tree files.
Added additional primitive icons.
Added support for array types within functions.
Added support for easier multi-page views.
Support added for program arguments.
Added align and spacing options to Arrange menu.
Added status bar info on position, size and selection.
Added model selection prompt to status bar.
Argument Name field enabling modified.
Implemented color picker for G308/G310.
Added support for selector switches.
|
| Hardware: |
| | G308C
G310C
G310S
|
|
| Build 2.0.0.021 (11/19/03) |
| Enhancements: |
| | Includes G303 firmware build 219
|
| Drivers: |
| | Siemens S7 via PPI
|
| Features: |
| | Support for page update rates
System variable DispUpdates
Goto previous page
Goto page shown as pop up
Page timeout properties
Data entry fields are reverse color in Crimson
Support for passcode entry fields
Read policy for array tags
|
|
| Build 2.0.0.019 (11/12/03) |
| Enhancements: |
| | Includes G303 firmware build 216 |
| Drivers: |
| | GE SRTP Ethernet v1.01 |
| Updates: |
| | Siemens Simovert via USS v1.01
GE SNP Master v1.02
|
| Features: |
| | Ability to map integer arrays to PLC data
Added ReadData function for array comms control
Added system variable support
|
|
| Build 2.0.0.018 (11/06/03) |
| Enhancements: |
| | Includes G303 firmware build 215
|
|
| Build 2.0.0.017 (11/04/03) |
| Enhancements: |
| | Includes G303 firmware build 214 |
| Drivers: |
| | Matsushita FP
|
| Updates: |
| | Modbus RTU slave
|
| Features: |
| | Enhanced interrupt latency for USB handshaking
|
|
| Build 2.0.0.015 (10/27/03) |
| Enhancements: |
| | Includes G303 firmware build 213 |
| Drivers: |
| | Red Lion Instrument v1.01 |
| Updates: |
| | Modbus, extended all register type ranges to 65535 |
| Features: |
| | Support for stopping/starting logs via enable field
Floating-point conversion to linear scaling
Language support for French, German, Italian, and Spanish
Functions - log, exp, log10, exp10, acos, asin, atan, and atan2
TextToFloat
Show and hide popup windows functions
|
|
| Build 2.0.0.009 (10/07/03) |
| Enhancements: |
| | Includes G303 firmware build 207 |
| Drivers: |
| | Siemens Simovert via USS serial driver version 1.01 |
| Updates: |
| | Extended Modbus Holding Registers to 65535 |
| Features: |
| | Play Dixie action supports different tunes |
|
| Build 2.0.0.008 (10/03/03) |
| Enhancements: |
| | Includes G303 firmware build 206 |
| Drivers: |
| | Modbus Slave ASCII and RTU.
PLC Direct Koyo Direct Net and K Sequence |
| Features: |
| | C2 manual and help files.
Format CompactFlash through G3 hardware
Check for new software update
Splash screen
Setpoint access method for rich bargraphs
MakeFloat and MakeInt commands
OnSecond, OnUpdate, and OnStart commands
|
|
